Search Our Library

Black Spots -Cylinder liner with black lacquer and cold corrosion

Wartsila Guide for condition of relevant piston-running components
(liner, pistons and piston rings) Version 2,1 June 2014.

6.2 To be monitored
6.2.2 Liner

Condition: Cylinder liner with quite some cold corrosion and some black lacquer
Acceptance: To be monitored
Action: Check correct cylinder oil feed rate setting in line with technical bulletins (TB) RT-161, RT-138

Read more ...

Stern Tube Seals Operation of AFT Seal Tank

The purpose of this bulletin is to provide operating instructions of AFT seal tank and the purpose of AFT seal tank installation.

- Purpose of AFT seal tank installation
- Operation when the seawater ingress
- Operation when the lube oil leakage

Read more ...

Load Dependent Cylinder Liner (LDCL) Cooling Water System

Cylinder liner cold corrosion is counteracted by raising the temperature of the exposed parts of the cylinder liner within permissible limits by making modifications to the cylinder liner design and by making changes of the cooling water system.
The latter is done by introducing the new Load Dependent Cylinder Liner (LDCL) cooling water system.

Read more ...

DUQ1-003E Troubleshoot of remote control system

Whenever the troubles for the remote control system have occurred the cause of trouble to be checked by suitable process not to be checked at random. This service information is made based on the trouble which have been reported in the past from many delivered ships.

Read more ...

SL2016-627/MIKA Tightening of Roller Guide Housing

MAN Diesel & Turbo has received reports of incidents of the roller guide housing in service. Such incidents often lead to consequential damage to the frame surface on which the housing is fixed.

The root cause of these incidents is the bolt connection between the housing and frame.

Read more ...

SL2016-632/AAB Alpha Lubricator Service Experience

This service letter applies to MAN B&W two-stroke marine diesel engines of the MC/MC-C type.
Furthermore, the aim of the service letter is to address the service issues that have come to our attention, as well as to introduce service kits for the Alpha lubrication system.

Read more ...

SL2017-648/JNN New Gasket Material for Roller Guide Housing

With SL2016-627 we introduced a 10 mm washer and longer installation bolts for the roller guide housing as a preventive measure to reduce the risk of incidents caused by insuffi cient tightening of the installation bolts. A few roller guide housing incidents have been reported even after introduction of the above-mentioned washer and bolt update.

Read more ...

More Articles ...